LinkedIn

November 07-10, 2017
Fuel Cell Seminar
Long Beach, California



P/N: ETI0001-1488A1 5.0 kVA Lockheed Martin Rugged Rackmount MilSpec UPS with Internal Intelligent PDU

Part Number:
ETI0001-1488A1 
Rugged Mil Spec® 5000 VA UPS
120 VAC Power Source with
3-Phase Input and 1-Phase Output
Rackmount UPS and Intelligent
Power Distribution Unit Combination


Military Power®Mil Spec N5Configuration
5000 VA Rugged Rack MountIsolated AC and DC UPS w/ Integrated
8 Circuit, 2 Pole, Intelligent, Solidstate Power Distribution Unit
Intelligent SNMP/HTTP Interface

5.0 kVA, 3 Phase Rugged MilSpec UPS/PDU Front View
P/N:
ETI0001-1488A1 Rugged Mil Spec UPS andPDU Standard Front 
Panel Layout

5.0 kVA, 3 Phase Rugged MilSpec UPS/PDU Rear View
P/N:
ETI0001-1488A1 Rugged Mil Spec UPS andPDU Standard Rear 
Panel Layout

The field proven Military Power® UPS line is ideally suited for military,industrial, computer and telecommunications applications requiring high reliability, rugged construction, compact size and light weight design.These units are equally suited for use in shipboard, airborne, vehicular, fielddeployed or fixed locations with controlled or uncontrolled environments. The
ETI0001-1488A1 was specifically designed for systemsrequiring high density power with 3-phase input.The
ETI0001-1488A1 does not require a separate PDU since the PDUfunctions are already integrated into the UPS module. This saves rack space,cabling and expense while improving overall reliability. 

The heavy-duty chassis occupies only 6U (10.5”) ofrack space for the electronics module and 2U (3.5”) for the battery module. Therounded metal corners and rugged handles, both front and rear, aid in safehandling. Internally, all major components are well secured and electrically insulated to preventdamage due to shock and vibration in any axis. These units can be mountedhorizontally or vertically. Optional heavy-duty rack slides provideeasy installation and removal of the unit with full extension.

The internal shieldedinput transformer provides galvanic isolation with provisions for nominal 208 VAC, 3-phase inputvoltages. Special EMI/RFI filters and inputpower factor correction minimize both input current and harmonics. The inputcircuit breaker and the isolation transformerprovide an isolated source for all installations including shipboard systems oroverseas locations where phase references and grounding are not consistent. 50or 400 hertz outputs are available as an option. 

The LED arrays keep the operator informed as to the unit's status including load and battery levels. The high intensity audible alarm can be heard in high noise environments and includes an audible disable switch. All controls and protective devices are brought to the front and rear panels with critical switches or circuit breakers having finger guards. Further, all front panel devices are recessed to prevent damage or accidental operation. The internal intelligent PDU allows control of the individual output circuits incorporating thermal and interlock interfaces for additional control and safety.

The rear panel provides locking MS threaded metal shellconnectors for the input and output power with various optional configurationsavailable. The Status connector provides aninterface with optional computer software providing loss of AC and low battery status as well as remote shut down capability.

Thisunit draws air through the front air filter and exhausts out the rear vent into the rack.This allows the unit to be used in negative or neutral pressure racks. Forpositive pressure racks, rear to front or rear to side versions are available. The removable and washable metal screen air filters and high capacitystainless steel ball bearing fans provideadded protection in both controlled and hostile environments. 

The
ETI0001-1488A1 has the added benefit of having afield replaceable battery via separate rackmount battery modules. The batteries are maintenance free with immobilized electrolyte and areconstructed of flame retardant materials. For more information, see the BatteryTechnology section. 

Maintaining documentation for equipment in the field has always been an issue. Instead of having to carry or locate the equipment documentation, the
ETI0001-1488A1 includes the built-in eDocs Port™, a patented feature unique to Energy Technologies, Inc. This flash drive contains all the relevant documentation for the unit at hand. This includes Operation and Maintenance manuals as well as training and troubleshooting guides. Utilizing a standard USB interface, these standardized electronic documents are readily available to the user.

See the Power Distribution Units section for a listing ofstand alone PDUs. See the N3 Series UPS section for UPS withoutthe integrated PDU and remote control.

Overall, the Rugged Power line is uniquely qualified for critical shipboard,vehicle, airborne or land based systems combining advanced modular designfeatures with highly reliable construction.

Technical Specifications:
P/N:
ETI0001-1488A1

AC OUTPUT
Output voltage: 120 VAC true sinewave standard
Output rating: UPS 5000 VA standard in 6U chassis x 23.5" deep 
0.65-0.75 pf standard
Non-linear load capacity: Up to 100% non-linear load capability w/o derating
Output voltage regulation: UPS ± 3.0% static regulation of nominal
± 4.0% dynamic (0 to 50% load step
Overload surge capacity: 110% for 10 minutes; 125% for 30 seconds
Harmonic distortion: Less than 5.0% into 100% non-linear load
Output frequency: UPS 60 Hz ± 2.5% synchronized to utility
60 Hz ± 1.0% w/ utility not available
50, 400 or 1000 Hz output available as an option
Operational status AC Input status, UPS operational, UPS alarm, Battery level, Low battery, Load level, Overload LEDs, Alarm contacts for Loss of AC and Low Battery
+90 dB audible alarm with audible on/off switch, 10BaseT Ethernet SNMP/HTTP port
AC INPUT
Input voltage: Nominal 208 VAC L-L, 3-phase
Input voltage tolerance: UPS 148-234 VAC @ full load without using battery
Input frequency: From 46 Hz to 70 Hz standard, optional to 440 Hz
Input power factor: Better than 99% typically
Input/output isolation: 6000 VA, up to 120 dB common mode, <1.0 mA leakage
Input transient suppression: Complies with IEEE 587 and UL 1449
Input control/protection: Guarded 3 pole 100 G shock rated circuit breaker (CB1)
plus UPS input fuses (F2A, F2B and F2C)
Input power connections: MS 3102R-24-22P, 4 pin, locking
EXTERNAL BATTERY
External battery type: Maintenance free immobilized electrolyte,
Flame retardant materials (Oxygen Index 28+)
External battery life: Rated for continuous service life of 5 years
External DC protection: Panel mounted fuse standard, breaker optional
External battery time: 5 minutes typical
External battery recharge: Recharged to nominal in 8 hours
DISTRIBUTION PANEL
Output circuits: Eight controlled outputs via solidstate relays
Output control: Local/remote control panel w/individual load switches
Thermal and remote interlock ON/OFF control
Output receptacles: NEMA 5015R threaded locking, various options
MECHANICAL
Dimensions (H x D x W):
  6U UPS Module
  2U Battery Module

10.5 6U) x 23.5 x 19.0 in (267 x 597 x 483 mm)
3.50 (2U) x 23.5 x 19.0 in (89 x 597 x 483 mm)
Rack Slide Mount Patterns: Jonathan, General Devices patterns standard, others optional
Alternate Mounting Options: Table, Wall, Floor, Portable, Horizontal/Vertical
Unit weight: Total
  UPS Module
  2U Battery Module
297 lb. (135 kg) with lift handles front and rear
197 lb. ( 90 kg) with lift handles front and rear 
100 lb. ( 45 kg) with lift handles front and rear
Audible noise: Less than 47 dB @ 5.0 ft., ANSI "A" scale
Cooling type: High capacity, positive pressure, forced air
Cooling air direction: Front intake, exhaust to rear
Air intake filter: Washable metal filter media, others optional
ENVIRONMENTAL
Storage temperature: -40° to 158° F ambient (-40° to 70° C) with fully charged batteries
Operating temperature: 32° to 122° F ambient ( 0° to 50° C), lower/ higher optional
Operating humidity: 0 to 95% relative humidity (non-condensing)
Storage elevation: Up to 40,000 ft (12,192 m)
Operating elevation: Up to 15,000 ft (4,572 m), higher optional
STANDARDS
United States: Meets UL-1778 standard for UPS equipment,
MIL STDs 167-1, 454, 810, 901D Grade A, 1399-300A & 2000
Canada: CSA C22.2 No. 107 UPS safety requirements
EMI Protection: EMI/RFI FCC Part 15, Class A; EN55022; MIL STD 461 
OPTIONAL ACCESSORIES
  Autoranging International Input, Cold Start, Alternate I/O Configurations, Dual Source Input, Battery Expansion, Batteryless Operation, Battery Charger/Conditioner, Power Distribution Units, Software InterfaceTransport Cases, Slides and Mounting Kits

This page was last modified on:March 18, 2012

Information Inquiry

Contact Us for Free Quotes or Info!

*(denotes required field)
Contact ETI by mail at:
Energy Technologies, Inc.
219 Park Avenue East
Mansfield, OH 44902-1845
USA

Contact ETI by phone or fax:
Voice: 419-522-4444
FAX: 419-522-4466